{"title":"Bunded Oil Tanks","description":"\n\u003cp\u003e\u003cstrong\u003eBunded oil tanks are legally required for all non-domestic heating oil storage and for domestic storage in higher-risk situations — and the consequences of non-compliance range from insurance invalidation to unlimited Environment Agency fines and criminal prosecution.\u003c\/strong\u003e Browse plastic and steel bunded oil tanks from 1,000L to 3,500L+, with slimline options for space-restricted sites. OFTEC compliant. Expert sizing advice available.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Are Bunded Oil Tanks?\u003c\/h2\u003e\n\u003cp\u003eA bunded oil tank is a double-skin storage vessel where the inner tank stores the heating oil, kerosene, or gas oil, and the outer bund (secondary containment wall) surrounds the inner tank to capture any leaks or overflow. The bund is sealed to form a watertight basin, ensuring that a catastrophic inner tank failure releases no oil into the environment.\u003c\/p\u003e\n\u003cp\u003eThe 110% containment rule applies: the outer bund must be able to hold 110% of the inner tank's total volume — the full contents of the tank plus a 10% buffer to account for accumulated rainfall or operational additions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does this matter?\u003c\/strong\u003e Heating oil (kerosene) is one of the most common causes of soil and groundwater contamination in rural UK. A single corroded or cracked single-skin tank leaking over months can contaminate drinking water wells, kill watercourses, and trigger Environment Agency enforcement requiring full soil remediation — costs that can exceed £500,000 for a significant incident. Insurers are increasingly refusing to cover domestic heating oil incidents involving single-skin tanks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho buys bunded oil tanks?\u003c\/strong\u003e Domestic properties off the gas grid heating with oil-fired boilers, farms and rural businesses, commercial premises including hotels, care homes, schools, and industrial facilities heating with oil.\u003c\/p\u003e\n\n\u003ch2\u003eTypes of Bunded Oil Tanks\u003c\/h2\u003e\n\u003ch3\u003ePlastic (MDPE) Bunded Oil Tanks\u003c\/h3\u003e\n\u003cp\u003eMedium-density polyethylene tanks are the dominant choice for domestic and agricultural heating oil storage. Advantages: rust-proof, UV-resistant, lower cost than steel, lightweight for easier installation, and widely available in the 1,000L–3,500L range that covers most domestic and small commercial requirements.\u003c\/p\u003e\n\u003cp\u003eMDPE tanks are compatible with kerosene (28-second heating oil), gas oil (35-second oil), and diesel. They are not appropriate for storing petrol.\u003c\/p\u003e\n\n\u003ch3\u003eSteel Bunded Oil Tanks\u003c\/h3\u003e\n\u003cp\u003eMild steel tanks with double-skin bunding are preferred for commercial applications, security-sensitive locations, and high-volume storage. Steel offers greater resistance to physical damage and is more difficult to vandalise or access for fuel theft — a significant consideration for commercial properties and rural farms with isolated tank locations.\u003c\/p\u003e\n\u003cp\u003eSteel tanks typically carry a longer warranty life and are available in larger capacities (5,000L+) for commercial operations.\u003c\/p\u003e\n\n\u003ch3\u003eSlimline Bunded Oil Tanks\u003c\/h3\u003e\n\u003cp\u003eSlimline variants achieve the same storage capacity as standard tanks but in a taller, narrower footprint — designed for properties with limited space between buildings, narrow side returns, or restricted delivery access. The slimline format reduces the ground footprint by 30–50% while maintaining full bunded compliance.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003ePlastic (MDPE)\u003c\/th\u003e\n\u003cth\u003eSteel\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCapacity Range\u003c\/td\u003e\n\u003ctd\u003e1,000L – 3,500L (standard)\u003c\/td\u003e\n\u003ctd\u003e1,000L – 10,000L+\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBund Capacity\u003c\/td\u003e\n\u003ctd\u003e110% of inner tank\u003c\/td\u003e\n\u003ctd\u003e110% of inner tank\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCorrosion Resistance\u003c\/td\u003e\n\u003ctd\u003eRust-proof (no corrosion)\u003c\/td\u003e\n\u003ctd\u003ePowder-coated or galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUV Resistance\u003c\/td\u003e\n\u003ctd\u003eUV-stabilised grade\u003c\/td\u003e\n\u003ctd\u003eYes (painted)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFuel Compatibility\u003c\/td\u003e\n\u003ctd\u003eKerosene, gas oil, diesel\u003c\/td\u003e\n\u003ctd\u003eKerosene, gas oil, diesel, petrol\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSecurity\u003c\/td\u003e\n\u003ctd\u003eLockable fill point\u003c\/td\u003e\n\u003ctd\u003eLockable fill + cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOFTEC Compliance\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSlimline Options\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTypical Lifespan\u003c\/td\u003e\n\u003ctd\u003e10–20 years\u003c\/td\u003e\n\u003ctd\u003e20–30 years\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInstallation Weight\u003c\/td\u003e\n\u003ctd\u003eLightweight\u003c\/td\u003e\n\u003ctd\u003eHeavy — may require mechanical handling\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompliance \u0026amp; Legal Requirements\u003c\/h2\u003e\n\u003cp\u003eThe regulatory landscape for domestic and commercial oil tank storage in the UK is governed by four key pieces of legislation:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThe Control of Pollution (Oil Storage) (England) Regulations 2001\u003c\/strong\u003e — the primary UK regulation for oil storage. Non-domestic premises storing more than 200 litres of oil must use a bunded tank providing 110% secondary containment. Domestic triggers apply when: storage exceeds 2,500L; the tank is within 10 metres of inland or coastal water; within 50 metres of a drinking water source; a spillage could travel over hard ground to reach a drain or watercourse; or the tank vent is not visible from the fill point.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThe Water Environment (Oil Storage) (Scotland) Regulations 2006\u003c\/strong\u003e — equivalent Scottish legislation governing oil storage in domestic and non-domestic premises.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThe Control of Pollution (Oil Storage) (Wales) Regulations 2016\u003c\/strong\u003e — the Welsh equivalent, which applies broadly similar standards to the English regulations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOFTEC Technical Standard OFS T100\u003c\/strong\u003e — the OFTEC (Oil Firing Technical Association) standard for oil tank installation, covering siting distances, secondary containment, fill point requirements, and testing. Tanks installed by OFTEC-registered contractors must comply with this standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInsurance impact:\u003c\/strong\u003e Many home insurance and commercial property insurance policies now require bunded oil tanks as a condition of cover for heating oil. Single-skin tanks on domestic properties that do not trigger the legal requirement may still result in an uninsured loss if a spill occurs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnforcement:\u003c\/strong\u003e Environment Agency officers conduct unannounced inspections in areas near watercourses. Single-skin domestic tanks presenting a risk to controlled water can be subject to enforcement even where they are not technically required by law to be bunded, if the officer concludes an imminent pollution risk exists.\u003c\/p\u003e\n\n\u003ch2\u003eIndustries \u0026amp; Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDomestic Heating (Off-Grid Properties):\u003c\/strong\u003e The largest market for bunded oil tanks. Rural properties heating with oil-fired boilers typically store 1,000L–2,500L. Bunding is strongly recommended even where not legally required, given the insurance and environmental risk of single-skin storage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAgriculture \u0026amp; Farming:\u003c\/strong\u003e Farm oil storage for both heating and red diesel (where separate from fuel tanks). Agricultural properties frequently fall under the commercial regulatory threshold. HMRC compliance for marked gas oil is also relevant for agricultural oil stores.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCommercial Properties:\u003c\/strong\u003e Hotels, care homes, schools, and industrial premises using oil-fired heating systems. Commercial properties storing more than 200L are legally required to use bunded tanks — no exceptions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustrial \u0026amp; Manufacturing:\u003c\/strong\u003e Process heating, lubricant storage, and hydraulic oil in larger capacities. Industrial sites may require multiple bunded tanks in a contained compound.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBackup Power Generation:\u003c\/strong\u003e Standby diesel generators require fuel storage. Generator fuel tanks are typically specified as bunded from 1,000L upwards for compliance with site planning conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuying Guide — How to Choose a Bunded Oil Tank\u003c\/h2\u003e\n\u003ch3\u003eStep 1: Calculate Your Storage Requirement\u003c\/h3\u003e\n\u003cp\u003eDivide your annual oil consumption by your planned delivery frequency (typically 2–4 deliveries for domestic, up to 6 for commercial). Add a 15% safety buffer to ensure you never run empty. For most homes heating with oil, 1,500L–2,500L is the typical range. Larger farmhouses and commercial premises often require 3,500L–5,000L.\u003c\/p\u003e\n\n\u003ch3\u003eStep 2: Confirm Legal Requirements\u003c\/h3\u003e\n\u003cp\u003eCheck whether you are a commercial\/non-domestic user (legal requirement for \u0026gt;200L storage) or a domestic user (check the siting triggers above). Even where not legally mandated, bunded tanks are strongly recommended for all domestic oil storage given insurance implications.\u003c\/p\u003e\n\n\u003ch3\u003eStep 3: Assess Your Space\u003c\/h3\u003e\n\u003cp\u003eMeasure your available installation space carefully. Standard tanks require clear siting distances from buildings, boundaries, and drains. If space is restricted, consider a slimline bunded tank that reduces the ground footprint while maintaining full capacity.\u003c\/p\u003e\n\n\u003ch3\u003eStep 4: Consider Security\u003c\/h3\u003e\n\u003cp\u003eRural and commercial sites should consider the risk of fuel theft — an increasing issue. Steel tanks are significantly harder to access than plastic. For plastic tanks on exposed sites, fit an anti-siphon lock and padlocked fill point as minimum security measures.\u003c\/p\u003e\n\n\u003ch3\u003eStep 5: Installation\u003c\/h3\u003e\n\u003cp\u003eTanks must be installed on a structurally sound, level base. Concrete pads are standard for tanks above 1,500L. OFTEC-registered contractors are recommended for domestic installations. Commercial installations should be carried out by experienced contractors with knowledge of the applicable regulations.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs a bunded oil tank a legal requirement in the UK?\u003c\/h3\u003e\n\u003cp\u003eFor non-domestic premises storing more than 200 litres of oil, yes — bunding is legally required under The Control of Pollution (Oil Storage) (England) Regulations 2001, with equivalent legislation in Scotland and Wales. For domestic properties, it is legally required if storage exceeds 2,500L or the tank is sited near water, drains, or has other specific risk factors. It is strongly recommended for all other domestic storage due to insurance requirements and environmental liability.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between a single-skin and bunded oil tank?\u003c\/h3\u003e\n\u003cp\u003eA single-skin tank has only one wall — if it leaks, oil goes directly to the ground. A bunded oil tank has two skins — an inner tank and an outer bund that captures any leaking oil. The outer bund holds 110% of the inner tank capacity, ensuring no oil escapes to the environment even in the event of complete inner tank failure.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I choose the right size bunded oil tank?\u003c\/h3\u003e\n\u003cp\u003eCalculate annual consumption, divide by expected delivery frequency (typically 2–4 per year for homes), and add 15–20% buffer. Most homes heating with oil use 1,500L–3,000L per year — a 2,500L tank with quarterly deliveries provides comfortable margins. Contact our team for a free sizing consultation.\u003c\/p\u003e\n\n\u003ch3\u003eCan I install a bunded oil tank myself?\u003c\/h3\u003e\n\u003cp\u003eFor domestic installations, an OFTEC-registered installer is strongly recommended and may be required by your insurance policy and local authority. For commercial installations, a competent contractor with knowledge of The Control of Pollution (Oil Storage) Regulations is required. Self-installation by unqualified persons may invalidate the tank warranty and insurance cover.\u003c\/p\u003e\n\n\u003ch3\u003eDoes a bunded oil tank need planning permission?\u003c\/h3\u003e\n\u003cp\u003eIn most cases, domestic oil tanks up to 3,500L capacity are covered by permitted development rights and do not require formal planning permission, provided they meet siting conditions (not forward of the principal elevation, not in certain designated areas). Commercial installations may require planning permission. Always check with your local planning authority before purchasing, particularly for larger tanks and in conservation areas or areas of outstanding natural beauty.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy From Spill Control Products UK?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Range of Capacities:\u003c\/strong\u003e From 1,000L domestic tanks to large commercial installations — all OFTEC-compliant bunded designs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlimline Options:\u003c\/strong\u003e Space-saving slimline bunded tanks for properties with restricted installation areas.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlastic \u0026amp; Steel:\u003c\/strong\u003e Both materials available — our team can advise the right choice for your site and security requirements.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e110% Bund Compliance:\u003c\/strong\u003e Every tank in our range meets the legal 110% secondary containment requirement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExpert Advice:\u003c\/strong\u003e Unsure which size or specification? Call our technical team for guidance on compliance, sizing, and installation requirements.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast UK Delivery:\u003c\/strong\u003e Standard domestic tanks from UK stock with mainland delivery coordination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor related products, see our \u003ca href=\"\/collections\/bunded-fuel-tanks\"\u003ebunded fuel tanks for diesel and petrol storage\u003c\/a\u003e, \u003ca href=\"\/collections\/oil-spill-kits\"\u003eoil spill kits\u003c\/a\u003e for emergency response pairing with your oil tank, and \u003ca href=\"\/collections\/ibc-spill-pallets\"\u003eIBC spill pallets\u003c\/a\u003e for bulk liquid containment.\u003c\/p\u003e\n","products":[{"product_id":"premium-leak-containment-collar","title":"Premium Leak Containment Collar with 11 Litre Sump and Easy Installation - 501 x 495 x 343mm | COSHH | UK","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Premium Leak Containment Collar is designed to be installed after a line shut-off valve to effectively capture and contain any drips or leaks, ensuring a clean and safe environment.\u003c\/p\u003e\n\u003ch2\u003eDimensions \u0026amp; Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color:#f8f9fa; border-bottom:2px solid #dee2e6;\"\u003e\n      \u003cth style=\"padding:12px; text-align:left; border:1px solid #dee2e6;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding:12px; text-align:left; border:1px solid #dee2e6;\"\u003eMeasurement\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eLength\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e501mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e495mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e343mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHoses connect through the bulkhead fitting in the back of the unit for convenience.\u003c\/li\u003e\n  \u003cli\u003eFeatures an 11 litre sump for effective drip and leak containment.\u003c\/li\u003e\n  \u003cli\u003eAvailable in two sizes for varied applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy to install and maintain, allowing for a set-and-forget solution.\u003c\/li\u003e\n  \u003cli\u003eEquipped with a drain plug for quick draining, cleaning, and maintenance.\u003c\/li\u003e\n  \u003cli\u003eConstructed from polyethylene, ensuring it will not rust or corrode over time.\u003c\/li\u003e\n  \u003cli\u003eLockable design adds an extra layer of security for peace of mind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyethylene\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSump Capacity:\u003c\/strong\u003e 11 Litres\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003e1. How do I install the Premium Leak Containment Collar?\u003c\/h3\u003e\n\u003cp\u003eSimply connect it after the line shut-off valve and ensure hoses are attached through the bulkhead fitting.\u003c\/p\u003e\n\u003ch3\u003e2. How do I clean the collar?\u003c\/h3\u003e\n\u003cp\u003eUse the drain plug for quick draining, then clean with appropriate cleaning materials.\u003c\/p\u003e\n\u003ch3\u003e3. Is the collar durable?\u003c\/h3\u003e\n\u003cp\u003eYes, its polyethylene construction ensures long-lasting durability without rusting or corroding.\u003c\/p\u003e","brand":"Spill Control Products UK","offers":[{"title":"Default Title","offer_id":56129003553148,"sku":"166582","price":941.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/4223\/1597\/files\/3d4bfa006c35500adb9702528a9877f7.png?v=1765976114"},{"product_id":"premium-leak-containment-collar-50mm","title":"Premium Leak Containment Collar with 11 Litre Sump, Easy Installation, and Polyethylene Construction - Dimensions 501 x 495 x 343mm | COSHH | UK","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Premium Leak Containment Collar is designed to be installed after a line shut-off valve to effectively capture and contain any drips or leaks. This innovative solution ensures safety and cleanliness in your operational environment.\u003c\/p\u003e\n\n\u003ch2\u003eDimensions \u0026amp; Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color:#f8f9fa; border-bottom:2px solid #dee2e6;\"\u003e\n      \u003cth style=\"padding:12px; text-align:left; border:1px solid #dee2e6;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding:12px; text-align:left; border:1px solid #dee2e6;\"\u003eMeasurement\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eLength\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e501mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e495mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e343mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHoses connect through the bulkhead fitting in the back of the unit\u003c\/li\u003e\n  \u003cli\u003e11 Litre sump capacity for effective leak containment\u003c\/li\u003e\n  \u003cli\u003eAvailable in two sizes for flexibility in use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy to install and can be left in place for ongoing protection\u003c\/li\u003e\n  \u003cli\u003eDrain plug facilitates quick draining, cleaning, and maintenance\u003c\/li\u003e\n  \u003cli\u003eDurable polyethylene construction ensures it will not rust or corrode\u003c\/li\u003e\n  \u003cli\u003eLockable design for added security and peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: Polyethylene\u003c\/li\u003e\n  \u003cli\u003eSump Capacity: 11 Litres\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e How do I install the leak containment collar?\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The collar is designed for easy installation after a line shut-off valve.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e What maintenance is required?\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Simply use the drain plug for quick cleaning and maintenance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e Is the collar durable?\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, it is made from high-quality polyethylene that does not rust or corrode.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spill Control Products UK","offers":[{"title":"Default Title","offer_id":56129004011900,"sku":"166490","price":900.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/4223\/1597\/files\/bd24e975ed46745bc8dcdbf8391554df.png?v=1765976147"},{"product_id":"premium-water-absorber-for-fuel-tanks","title":"Premium Water Absorber for Fuel Tanks - Super-Absorbent Polymer with Mesh Filter, 3 Size Options for Effective Water Removal | OFTEC | UK","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eCondensation occurs in most fuel tanks and can lead to corrosion or poor engine starting. This premium water absorber is made with super-absorbent polymer and features a mesh filter containment to effectively remove water and prevent further accumulation.\u003c\/p\u003e\n\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\u003cp\u003eTo use, secure the nylon cord in place (we recommend the underside of the fuel cap) and lower it to the bottom of the fuel tank where water may have settled. The absorber will absorb any water while repelling the fuel. It can be left in place for up to 3 months but should be checked monthly. Once the absorber reaches full saturation, the nylon bladder will fully expand into the mesh filter containment tube.\u003c\/p\u003e\n\n\u003ch2\u003eAvailable Sizes\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color:#f8f9fa; border-bottom:2px solid #dee2e6;\"\u003e\n      \u003cth style=\"padding:12px; text-align:left; border:1px solid #dee2e6;\"\u003eSize\u003c\/th\u003e\n      \u003cth style=\"padding:12px; text-align:left; border:1px solid #dee2e6;\"\u003eDimensions\u003c\/th\u003e\n      \u003cth style=\"padding:12px; text-align:left; border:1px solid #dee2e6;\"\u003eAbsorption Capacity\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eMini\u003c\/td\u003e\n      \u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e4.4cm x 15cm\u003c\/td\u003e\n      \u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e134.5ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eSmall\u003c\/td\u003e\n      \u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e4.4cm x 30cm\u003c\/td\u003e\n      \u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e269ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eLarge\u003c\/td\u003e\n      \u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e10cm x 30cm\u003c\/td\u003e\n      \u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e1.59L\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMini:\u003c\/strong\u003e Suitable for small onboard motors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmall:\u003c\/strong\u003e Ideal for continental trucks, boats, small domestic heating oil tanks, and Agas.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLarge:\u003c\/strong\u003e Designed for use in commercial tanks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHow often should I check the water absorber?\u003c\/strong\u003e It is recommended to check it every month.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCan the absorber be reused?\u003c\/strong\u003e No, once it reaches full saturation, it should be replaced.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHow long does it last?\u003c\/strong\u003e The absorber can remain in place for up to 3 months.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spill Control Products UK","offers":[{"title":"Mini","offer_id":56129029636476,"sku":"130207","price":54.0,"currency_code":"GBP","in_stock":true},{"title":"Small","offer_id":56129029669244,"sku":"130203","price":58.92,"currency_code":"GBP","in_stock":true},{"title":"Large","offer_id":56129029702012,"sku":"130205","price":70.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/4223\/1597\/files\/0b3e47546909e144b295a13530ad7f10.png?v=1765976920"}],"url":"https:\/\/www.spill-control-products.co.uk\/collections\/bunded-oil-tanks.oembed","provider":"Spill Control Products UK","version":"1.0","type":"link"}